The woodworking bag dust collector is maintained and repaired during operation. This is an important operation when using the equipment. The benefit of regular maintenance is that equipment failures can be discovered in time and the equipment can be kept in operation for a long time. Generally, regular maintenance of equipment is time-limited, and maintenance and inspection can be carried out according to the specified time. This can not only detect equipment failures in time, but also keep the equipment in good operating condition.
The woodworking bag dust collector system adopts the working principle of combining inertial separation with filtration dust removal. It can handle high-concentration mixed dust airflow and separate fine powder particles below 5um. It is an ideal alternative to traditional cyclone dust collectors. It adopts galvanized sheet modular structure design, which is beautiful and elegant. The filter bags are made of high-quality materials to reduce fire hazards. At the same time, it adopts large meteor electromagnetic pulse valve to spray and clean the filter bags one by one, and the operating resistance is low.
Working principle:
The woodworking bag dust collector consists of a modular woodworking dust collector, a main pipeline, branch pipelines, a dust separation unit, and a dust discharge device. Dust generated during operation, under the action of negative pressure, enters the main pipeline through the branch pipeline and enters the dust collector settling chamber for initial settling. Unsettled fine dust moves upward with the airflow and is filtered through the filter bags for secondary filtration. Based on the dust concentration and dust quantity, the filter bags are periodically sprayed by a pre-set automatic pulse cleaning device. The fallen dust falls into the settling chamber and is discharged by the dust discharge device at the back of the chamber.
For the workshops of large-scale wood processing enterprises, a constant-pressure sedimentation network pipe layout is required. The constant-pressure vacuum sedimentation conveying trough is equivalent to a constant-pressure vacuum chamber. The main body is made of galvanized sheet metal and has a standard modular structure. It can be easily lengthened, shortened or decomposed according to needs, which is convenient for future modification of the vacuum pipe network and can adapt to the long-term needs of production processes and changes in vacuum air volume.
When the woodworking bag dust collector system is running, the coarse and heavy materials and most of the powder will settle to the bottom and be discharged out by the internal scraper conveyor, while a small amount of light and fine dust will enter the dust collector through the main pipeline, which can reduce the workload of the dust collector and extend its service life.
The constant pressure vacuum generated in the conveying trough can make each dust suction branch pipe connected to it obtain uniform pressure, thereby ensuring the dust suction wind speed of each dust suction port.
It is suitable for large wood processing workshops and other places where the dust collection air volume is prone to large changes or the production process is prone to changes.
Working conditions of woodworking bag dust collector:
It is suitable for collecting solid wood shavings, artificial board particles, wood fiber and dust generated by various woodworking machinery and equipment such as four-sided planers, sanders, saws, slicers, rod grinders, etc. in various wood factories, furniture factories, wood flooring factories, wood board factories, etc.
