The driving device of the FU series chain conveyor adopts the XWD planetary cycloidal pinwheel reducer.
The length L of the conveyor is set in increments of 0.5 meters. FU150、 The standard intermediate section length of 200 and 270 conveyors is 2 meters; The non-standard intermediate section length is 1.5 meters and 1 meter. The standard intermediate section length of FU350 model is 3 meters; The non-standard intermediate section lengths are 2.5 meters, 2 meters, and 1.5 meters. When arranging the process, several standard intermediate sections and several non-standard intermediate sections can be combined to form the required length L, and standard section combinations should be selected as much as possible. There are two types of conveyor chains: ordinary type and temperature resistant type (60 ℃ -110 ℃). When the material temperature exceeds 110 ℃, please contact our factory to place an order.
Characteristics of FU series chain conveyor:
(1) Reasonable structure, innovative design, strong technology, series.
(2) Fully enclosed casing, good sealing performance, stable operation, and smooth running.
(3) The conveyor chain of the chain conveyor is made of alloy steel processed by heat treatment, with a long service life and low maintenance rate.
(4) Large conveying capacity, with a conveying capacity of up to 11m3/h.
(5) Low energy consumption during transportation, utilizing the internal friction of materials to transform the pushing force into tension, saving energy.
(6) Flexible import and export, can be installed on elevated, ground, pit, horizontal, and uphill (≤ 15 °) platforms, and the conveying length can be designed according to the user’s requirements.
The FU buried scraper conveyor appeared in the 1920s and was invented by Britain. Nowadays, the buried scraper conveyor has matured in theory, design, manufacturing, and application. The buried scraper conveyor has the following requirements for the materials it transports. The universal buried scraper conveyor is not suitable for transporting high-temperature, toxic, explosive, flammable, abrasive, corrosive, adhesive, suspended, highly fluid, hard, brittle, and materials that do not want to be broken. Materials with these characteristics require the use of buried scraper conveyors:
Bulk density of conveyed materials: γ=0.2~1.8t/m3; Material conveying temperature: t<100 ° C.
Moisture content of conveyed materials: For general materials, they should not be kneaded into clumps by hand to prevent them from becoming loose; As the moisture content increases, it will increase the adhesion and compaction properties, and the material should not be severely adhered to the scraper.
Particle size of conveyed materials: The particle size of materials is related to their hardness. If the particle size is too large, it is not suitable for conveying.
Our company’s FU buried scraper conveyor has become a widely used equipment for conveying bulk materials, such as coal powder, crushed coal, gypsum powder, limestone powder, wheat, soybeans, wood chips, sawdust, polyvinyl alcohol synthetic detergent, fly ash phosphate fertilizer, etc. Moreover, our company’s buried scraper conveyors are available in three series: MS, MC, and MZ buried scraper conveyors. This product is a transportation equipment that uses a moving scraper chain to continuously transport bulk materials inside a closed rectangular cross-section shell. The equipment not only has a simple structure, small volume, good sealing performance, but also is easy to install and maintain; Capable of adding and unloading materials at multiple points, with flexible process selection and layout; Moreover, when transporting materials that are flying, toxic, high-temperature, flammable, and explosive, the working conditions can be changed to reduce environmental pollution.
